日本JANOME 激光焊接机器人UNIX-LS1 UNIX-LS1 深圳市伟烨鑫科技有限公司

产品详情

查看大图

产品名称：日本JANOME 激光焊接机器人UNIX-LS1
产品型号：UNIX-LS1
产品厂商：日本JANOME车乐美
产品价格：0
折扣价格：0
产品文档：

你添加了1件商品查看购物车

简单介绍：

日本JANOME 激光焊接机器人UNIX-LS1 特点：日本JANOME 激光焊接机器人 UNIX-LS1 深圳市伟烨鑫科技有限公司代理

详情介绍：

深圳市伟烨鑫科技有限公司 www.best-tools.cc 代理日本JANOME 激光焊接机器人UNIX-LS1

High-Precision Laser Soldering Robot System [UNIX]

Non contact soldering provide you precise and high quality soldering in Lead Free Soldering.

Laser Soldering Robot System UNIX413L2

　Next generation soldering

Noncontact soldering has the following advantages:
- no icicle is formed,
- any impurities are not mixed into solder, and
- It is appropriate for control of the solder amount or fine work such as fixing of a part that is difficult to be done.

This system provides the next generation soldering method that is expected to be applied to lead-free soldering also.

　Reduction of Consumables and Waste

Since the amount of the wasted solder is far less than that of the Wave soldering or soldering iron system, this system contributes for reduction of industrial waste. In addition, it does not require consumables such as an iron tip and heater, so it is very easy to perform routine maintenance.

　Laser Diode

The laser diode (fiber coupling type) whose output is high (30 W) is used.

　Laser Head into Which a Coaxial CCD Camera Is Incorporated

The CCD camera incorporated on the vertical axis onto which laser is irradiated shoots an image of the target point.

　Simple and Compact Design

Since the laser oscillator section, output control unit and laser head are separated, you can design installation or configuration of the system as desired. This is a small device that uses laser diode. Soldering is available even for a minute work without missing the laser irradiation point.

　Teaching on the Monitor

While observing an image of the point irradiated with laser on the monitor, teaching operation is available also. You can operate this system safely.

　LCD Touch Panel System

The LCD touch panel equipped with the backlight is used.You can intuitively check various settings such as the laser output power and irradiation time.

　Large Work Area

The long focal length optical system is adopted so that a large area from the lens to the work can be secured.

　Air Jet Type Soldering Smoke Preventing Mechanism

Parts around the optical system inside the laser head are shielded from the outside, and the air jet system is incorporated into the robot. Therefore, this structure does not allow any smoke from the soldering flux be blown into the inside easily. This robot can spray nitrogen also.

　Laser Output Control Mode

In Output Control mode, this system allows you to check the laser power and time with observing the waveform displayed on the LCD panel. It can store up to 32 output conditions also.

　Easy Cleaning of the Optical Lens Protective Glass

The dual structure of protective glass blocks any flying flux and/or solder ball. This glass is the sliding type, so it is easy to clean.

Laser Soldering Unit

Specifications of Main Robot Body
Number of axes		3 (controlled simultaneously)
Operable range	X-axis/Y-axis	300mm/320mm
	Z-axis	100mm
Driving system		Driven by the 5-phase pulse motor
Positioning repeat accuracy		±0.01mm
Weight of the main unit		Approximately 39 kg
Number of soldering conditions		63
Diameter of the used solder		φ0.5~φ1.2

Specifications of Laser Soldering Unit ULD-730

Rated output

30W or 50W

Waveform length

Selectable from 2 types

Laser spot diameter　*1

φ0.4~ or φ0.6~

Laser focal distance　*2

60mm (from the bottom side of the lens)

Fiber length

Maximum operating current

50A

Power voltage

Single-phase AC100V±10% 50/60Hz

Power capacity

800VA

Laser positioning system

Observation of the same axis with a CCD camera

Weight

Output control section

16Kg

Laser oscillator section

9Kg

Head section

0.7Kg

Safety standards/regulations

JIS Class 4 labels

Warning label

Explanation label

*1 The minimum diameter becomes o 0.2 when you use an optional unit.
*2 The long focal distance is available when you use an optional unit.

标题：

内容：

联系人：

联系电话：

Email：

公司名称：

联系地址：

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!

2.如有必要,请您留下您的详细联系方式!

产品名称：日本JANOME 激光焊接机器人UNIX-LS1

High-Precision Laser Soldering Robot System [UNIX]