产品名称：输出型扭力扳手TSN55-SW美国MOUNTZ蒙士

输出型扭力扳手TSN55-SW美国MOUNTZ蒙士

• • The torque wrenches are fitted with a Universal Rotary Switch Module (360 rotating connector prevents twisting or kinking of the cable), which signals when a pre-set torque value is reached.
  • Signal Output Wrenches can be connected to a Signal Delay Unit(accessory item) to monitor the use of the wrenches as the electrical signal is displayed each time the wrench achieves its pre-set torque value.
  • Micro-switch contained in internal shock-resistant housing.
  • Possible use in Production Line Control: Allowing only components with correctly torque fasteners to pass through a work station. This could be a simple matter of actuating a gate switch or signaling a computer controlled work station.
  • Counting Function: Count the number of times the torque has been applied - check against finished goods.
  • Possible Uses
    - Production Line Control: Allowing only components with correctly torque fasteners to pass through a work station. This could be a simple matter of actuating a gate switch or signaling computer controlled work station. 
    - Counting Function: Count the number of times the torque has been applied – check against finished goods

  TSP (Cam-Over Signal Output Wrench)

  Model	Item #	lbf.in	N.m	kgf.cm	Sq. Dr	Wt. oz.	Wt. kg
  TSP5/45-SW	020720	10 - 45	1 - 5	10.2 - 51	1/4"	18.7	240
  TSP10/90-SW	020721	20 - 90	2 - 10	20.4 - 102	1/4"	18.7	240

   

  TSN  (Cam-Over Signal Output Wrench)

  Model	Item #	lbf.ft	N.m	kgf.m	Sq. Dr	Wt. oz.	Wt. kg.
  TSN25D-SW	020275	2 - 18	3 - 25	0.3 - 2.5	1/4"	24	0.68
  TSN25A-SW	020261	2 - 18	3 - 25	0.3 - 2.5	3/8"	24	0.68
  TSN55-SW	020259	10 - 40	15 - 55	1.5 - 5.6	3/8"	40.2	1.14
  TSN125-SW	020266	30 - 90	40 - 125	4 - 12.7	1/2"	60	1.7

   

  MTBN (Break-Over Signal Output Wrench)

  Model	Item #	lbf.in	N.m	kgf.cm	Drive Type	Wt. oz.	Wt. kg	Break
  MTBN2-SW	020319	1.8 - 18	0.2 - 2	2 - 20	Captive Pin	15.8	0.45	20° or 90°
  MTBN10-SW	020327	9 - 89	1 - 10	10 - 102	Captive Pin	16.5	0.65	20° or 90°
  MTBN25-SW*	020492	44 - 221	5 - 25	51 - 255	16mm Spigot	26.5	0.75	20°
  MTBN65-SW*	020633	89 - 575	10 - 65	102 - 663	16mm Spigot	38.5	1.09	20°
  MTBN135-SW*	020634	177 - 1194	20 - 135	204 - 1377	16mm Spigot	59.2	1.68	20°
  MTBN200-SW*	020719	354 - 1770	40 - 200	408 - 2039	16mm Spigot	61.4	1.74	20°

  * MTBN 25, 65, 135 & 200 operate in single direction (clockwise)

   

  Note! Each wrench includes universal rotary switch and straight cable.

  Dimensions

   

  Accessory Optional - Cable

  Model: Spiral Cable  Item # 20-D94406

  Replacement Parts Each Signal Output wrench includes a straight cable and universal rotary switch module. If you need to replace an item, order these part numbers.

  Model: Universal Rotary Switch module Item # 20-B25900

  Model: Straight Cable  Item #20-D94402