- 韩国DIT东日技研
- 日本FUJI富士
- 日本Shinano信浓
-
日本NKS
- 日本NPK
-
美国史丹利STANLEY
- 日本KAWASAKI川崎
- 日本虾牌Lobster
-
三菱MITSUBISHI电机
-
日本Nidec尼得科
-
韩国JIT钉枪
-
西班牙MELER梅尔
-
日本Suntes三洋
-
德国Turck图尔克
-
日本OMRON欧姆龙
-
日本Kosaka小坂研究所
-
日本SIBATA柴田科学
-
日本SMC
-
日本Tempearl天保
- 日本CCS晰写速光源
- 日本AITEC艾泰克
- 日本MINIMO 研磨工具
- 日本TOKU东空
-
日本THK
-
日本meiji明治
-
日本露明纳LUMINA
-
日本JANOME
-
日本UNIX优琳
-
日本(GOOT)太洋
-
日本(BONKOTE)邦可
产品详情
简单介绍:
美国MOUNTZ蒙士扭矩传感器SDX10i (078000)
美国MOUNTZ蒙士扭矩传感器SDX10i (078000)
详情介绍:
美国MOUNTZ蒙士扭矩传感器SDX10i (078000)
美国MOUNTZ蒙士扭矩传感器SDX10i (078000)
- Torque Sensors for auditing or tightening fasteners to a specified torque when mated with a torque analyzer.
- Ergonomic rubber grip and stainless steel Female/Hex bit holder.
- Features “ARC II” technology, an instant auto-recognition system of the SDX connected to the FTA-100, LTT or PTT.
- Connect to a torque analyzer to monitor, test or audit a fastener.
- Safe Overload: 125% of Rated Output.
- Length x Width ( 6” x 1 1/2”)
- Weight 0.5 lbs
- Accuracy ± .25% of full scale*.
Note: * This is the stand alone accuracy for the torque sensor. When the torque sensor is coupled with a Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer (FTA-100, PTT or LTT).
Model | Item # | American | S.I. | Drive Size |
SDX10i | 078000 | 1 - 10 lbf.in | 11.3 - 113 cN.m | 1/4 F/Hex |
SDX50i | 078001 | 5 - 50 lbf.in | 56.5 - 565 cN.m | 1/4 F/Hex |
Certified: Supplied with NIST-Traceable Certification of Calibration |
|
SDX Pin Connection A = Signal (+) B = Signal (-) C = Excitation (-) D = Excitation (+) E/F = N/A |
美国MOUNTZ蒙士扭矩传感器SDX10i (078000)
美国MOUNTZ蒙士扭矩传感器SDX10i (078000)
美国MOUNTZ蒙士扭矩传感器SDX10i (078000)